Buy the “Solar System 3000W 5000W 220v Solar Panel 300w 20V Hybrid Inverter 3kw 5kw Controller 60A 80A MPPT Off Grid Backup” and get a FREE E-BOOK entitled “Renewable Energy”.
3KW system includes
6 Pcs of solar panel 300w 20v
1 Set of Hybrid Inverter 3000w 48V 220v With Solar Charge Controller 60A MPPT Pure Sine Wave
1 Set of Connection Cable
4 Set of Gel Battery 12v 38Ah
5KW system includes
10 Pcs of solar panel 300w 20v
1 Set of Hybrid Inverter 5000w 48V 220v With Solar Charge Controller 80A MPPT Pure Sine Wave
1 Set of Connection Cable
4 Set of Gel Battery 12v 38Ah
Warranty and installation manual
Total system is 2- year warranty.
The solar panel is a 10-year quality warranty, 90% output in 15 years and 90% output in 20 years,25-30 year life span
The hybrid inverter controller is 2 year
3kw system or 5kw system ?
3KW system can generate about 10KWH per day
Why choose the hybrid inverter controller instead of the solar controller and inverter?
● Full digital voltage and current double closed-loop control, advanced SPWM technology, and the output of pure sine wave.
● Two output modes: mains bypass and inverter output; uninterrupted power supply.
● Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
● Advanced MPPT technology with an efficiency of 99.9%.
● Designed with an LCD screen and 3 LED indicators for the dynamic display of system data and operating status.
● ON/OFF rocker switch for AC output control.
● Power saving mode available to reduce no-load loss.
● Intelligent variable speed fan to efficiently dissipate heat and extend system life.
● Lithium battery activation design, allowing access to lead-acid battery and lithium battery.
● 360 ° all-round protection with a number of protection functions.
● Complete protections, including short circuit protection, over-voltage and under voltage protection, overload
protection, reverse protection, etc
The importance of a hybrid inverter controller
HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output
The DC-AC inverter module employs advanced SPWM technology and outputs a pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment
Comprehensive electronic protections keep the entire system safer and more stable.
The data ,ideal for 3000w -5000W solar panel ,220v off-grid system
model HF4830S60-H HF4850S80-H
Mains mode
Rated input voltage 220/230Vac
Input voltage range (170Vac~280Vac) ±2%
(90Vac-280Vac)±2%
frequency 50Hz/ 60Hz (auto detection)
Frequency Range 47±0.3Hz ~ 55±0.3Hz (50Hz);
57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection breaker
effectiveness >95%
Conversion time 10ms (typical)
(Bypass and inverter)
AC backfill protection Yes
Maximum bypass overload current 30A 40A
Inverter mode
Output voltage waveform Pure sine wave
Rated output power (VA) 3000 5000
Rated output power (W) 3000 5000
Power Factor 1
Rated output voltage (Vac) 230Vac
Output voltage error ±5%
Output frequency range (Hz) 50Hz ± 0.3Hz 60Hz ± 0.3Hz
effectiveness >90%
Overload protection ”
(102%<load<125%) ±10%: report an error and turn off the output after 5 minutes;
(125%<load150% ±10%: report an error and turn off the output after 5 seconds;”
Peak power 6000VA 10000VA
Loaded motor capacity 2HP 4HP
Output short circuit protection breaker
Bypass circuit breaker specifications 30A 40A
Rated battery input voltage 48V (minimum starting voltage 44V)
Battery voltage range 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set)
Power saving mode
Load ≤25W
Mains charging
type of battery Lead-acid or lithium battery
Maximum charging current 60A
Charge current error ± 5Adc
Charging voltage range 40–60Vdc
Short circuit protection Circuit breaker and a blown fuse
Circuit breaker specifications 30A 40A
Overcharge protection Alarm and turn off charging after 1 minute
Solar charging
Maximum PV open circuit voltage 500Vdc
PV operating voltage range 120-500Vdc
MPPT voltage range 120-450Vdc
Battery voltage range 40-60Vdc
Maximum output power 4000W 5500W
Solar charging current range (settable) 0-60A 0-80A
Charging short circuit protection Blown fuse
Wiring protection Reverse protection
Certification specifications
Specification certification CE(EN62109)
EMC certification level EN61000, C2
range of working temperature 1-15°C to 55°C
Storage temperature range 1-25°C ~ 60°C
Humidity range 5% to 95% (three anti-paint protection)
noise ≤60dB
Heat dissipation Forced air cooling, adjustable wind speed
Communication interface USB/RS485 (Bluetooth/WiFi/GPRS)/Dry node control
Size (L*W*D) 426mm*322mm*126mm
Weight (kg) 10.9
Solar Panel 300W 20V
Pmax:300W
Size and Number of Cells :156mm*156mm 72 Pcs / 6*12
Tolerance:± 3%
Vmp:30V
Imp :10A
Voc:36 V
Isc:11A
Max.Syst.Oper.Voltage:1000V
Dioders:6 by-pass
Dimension:1640mm*992mm*35mm
Weight:17Kg
Operate Temp.Scope:-40 degree to 80 degree
Relative Humidity:0 to 100%
Resistances:227g steel ball falls down from 1m high and 60m/s wind speed
Warranty: Pm is not less than 90% in 10 years and 80% in 25 years
Gel Battery
2-year warranty
What is the shipping method?
It is sea transportation to the destination port.
When the buyer pays the order, the seller will find the nearest port to the buyer and Await confirmation from the buyer.
When the solar panel is on board, the seller will send the loading bill, commercial invoice, and packing list to the buyer’s e-mail for customs clearance.
When the solar panel reaches the port, the buyer has to go to the port, pay the destination port fee and tariff or duty and pick up the solar panel.
Certificate-CE
Reviews
There are no reviews yet.